
How to Program Ford Key Fobs
How to Program Ford Key Fobs
Ford Key Fob Programming Guide
These Ford key fob programming instructions are all you need to ensure that keyless entry is functioning as it should!
Make sure all car doors are closed. Enter the car via the driver-side door, pressing the UNLOCK button inside the doorframe.
In a 10-second span, turn the key in the ignition from OFF to RUN eight times. The last turn should leave the car on RUN.
At this point, you should have entered programming mode, indicated by the door locks cycling between lock and unlock. If they do not, repeat step 2, turning the key faster.
Once in programming mode, press any button on your Ford remote. This must be completed within eight seconds of the door locks beginning to cycle. They will cycle again to confirm your remote has been programmed and is now ready to use.
Repeat step 4 for additional remote key fobs, as needed.
When finished, turn the ignition to OFF. Your door locks may cycle again as another confirmation of programming completion.
Contact
Mike Murphy Ford
565 West Jackson Street
Morton, IL 61550
- Sales: 309-291-3038
- Service: 309-291-3038
- Parts: 309-291-3038
Get More Tips on Using Ford Parts at Mike Murphy Ford!
Still having trouble with the Ford key fob programming process? Have other questions about Ford parts? Make your way from East Peoria or Pekin to our dealership in Morton for assistance! Our certified technicians are standing by to walk you through the steps of how to program a Ford key fob or any other guidance you require!-
Mike Murphy Ford
565 West Jackson Street
Morton, IL 61550
- Sales: 309-291-3038